| PART |
Description |
Maker |
| STK6982 STK6981H STK6980 STK6980BII STK6980H STK69 |
SWITCH, HIGH V, QUAD SPST, SOIC16; Resistance, Rds on:4R; Pins, No. of:16; Case style:SOIC; Base number:452; Logic function number:452 RoHS Compliant: Yes
4-PHASE STEPPING MOTOR DRIVE FOR UNIPOLAR CONSTANT-CURRENT CHOPPER DRIVER
(STK698x) 4-PHASE STEPPING MOTOR DRIVE
|
Electronic Theatre Controls, Inc.
ETC[ETC]
List of Unclassifed Manufacturers
|
| AN8231K AN8231S |
Low-voltage FDD Motor Drive Control Circuits
|
Panasonic
|
| STK672-210 |
Two-Phase Stepping Motor Driver Output Current: 1.4 A 两相步进电机驱动器输出电流：1.4
From old datasheet system
Stepping Motor Drivers
|
Sanyo Electric Co., Ltd.
Sanyo Semicon Device
|
| MP6404 |
Power MOS FET Module Silicon N&P Channel MOS Type (L2-pi-MOSV 6 in 1) High Power High Speed Switching Applications 3-Phase Motor Drive and Stepping Motor Drive Applications
|
TOSHIBA
|
| KS5206 |
Bipolar Stepping Motor Drive Analog Clock
|
Samsung Electronics
|
| TB6528P E008393 |
From old datasheet system
FIVE-PHASE STEPPING MOTOR DRIVE CONTROLLER
|
TOSHIBA[Toshiba Semiconductor]
|
| BD63801EFV BD63801EFV12 |
Stepping Motor Driver Series Standard 36V Stepping Motor Drivers
|
Rohm
|
| STK673-010 |
3-Phase Stepping Motor Driver(sine wave drive) Output Current 2.4A 三相步进电机驱动器（正弦波驱动器）输出电.4
|
Sanyo Electric Co., Ltd.
SANYO[Sanyo Semicon Device]
|
| TA8463F E003827 |
From old datasheet system
SINGLE CHIP 3 PHASE MOTOR DRIVER FOR FDD SPINDLE MOTOR
|
TOSHIBA[Toshiba Semiconductor]
|
| AN8210NK |
IC for FDD Spindle Motor Control
|
Panasonic
|
| STK672-110 |
STEPPER MOTOR CONTROLLER, 2.65 A, PSIP12
Aluminum Polymer Radial Lead Capacitor; Capacitance: 1800uF; Voltage: 2.5V; Case Size: 8x9 mm; Packaging: Bulk 两相步进电机驱动器（方波驱动）输出电流：1.8
Unipolar Fixed-Current Chopper (Self-Excited PWM) Scheme and Built-in Phase Signal Distribution IC Two-Phase Stepping Motor Driver (Square Wave Drive) Output Current: 1.8 A
|
Sanyo Electric Co.,Ltd.
Sanyo Electric Co., Ltd.
SANYO[Sanyo Semicon Device]
|
| STK672-080 |
Stepping Motor Driver (Sine Wave Drive) Output Current: 2.8 A (No Heat Sink*) Unipolar constant-current chopper (external excitation PWM) circuit with built-in microstepping controller
|
SANYO
|
